A Pillar in the Desert is an abstract print that nevertheless has clear references to landscape. Like most of this series, it began life as an entirely abstract background layer. As I added each subsequent layer the image gradually formed into the print you see here. The title reflects my semi-obsession with the art of the neolithic, but also refers to the biblical story of Lot’s wife.
The print was made by gel printing with acrylic paints on paper and is about 30 cm square. It is unmounted and unframed, although if you wish I can mount it on a cradled wooden panel, with black painted edges ready to hang on your wall.
During lockdown, I have made large series of similar colourful abstract monotype prints. They represent a new direction for my work, one I intend to continue to explore for a good while yet. I am very drawn to the way in which abstract, almost accidental layers of colour can be transformed into a coherent structured artwork, as with this very stylised landscape and other examples such as those inspired by the Irish coastline
What is a gel print?
Monotype prints in general are made by drawing or painting on a smooth, non-absorbent surface. This surface, sometimes called the matrix, was historically a copper etching plate. In contemporary work other materials are often used, such as acrylic sheet. The image on the matrix is then transferred onto a sheet of paper by pressing the two together. This usually requires a print press. Monotypes can also be created by inking an entire surface and then, using brushes or rags, removing ink to create light areas in a field of opaque colour. This is then pressed together with a sheet of paper to make the print.
The specific process I used for this print was gel printing (or Gelli but this is a trademark). The matrix in this case is a soft synthetic gel. I apply the paint to the gel sheet with rollers or brushes. The area to which the paint is applied can be controlled by masks and stencils. The rolled out paints can also be drawn into or textured in various ways. This process is repeated until I’m happy with the image.
Some of my prints made this way have over 20 separate full or partial layers. The nature of the process allows for both intense bright colours and subtle variations in colour as well as tangible physical texture.+