Posted on 1 Comment

Generating abstract shapes for stencils

In this post, I describe some methods for digitally generating abstract shapes. One produces almost entirely random shapes, the second creates forms that look like text but are not (sometimes called asemic writing), while the third creates images looking like figure ground diagrams. The files created can then be used to create cutting files for use in a digital cutter.

This is the third in a series of posts about digital tools for gel printing. The first is here, the second, here. Also relevant, is this post on using the prints themselves as a digital resource

Random shapes

It’s very difficult to create a genuinely random shape. I developed this technique to get around that.

Start with a photograph. The subject doesn’t matter, but landscapes and skies seem to work well. In PSP, select the ‘Magic Wand’ tool from the icon menu on the left-hand side.

Third icon down and select ‘Magic Wand’ from the drop-down menu. Once selected, a toolbar opens along the top. Two options are critical – ‘Tolerance’ and a checkbox marked ‘Contiguous’.

‘Tolerance’ defines how close a pixel has to be to the colour you click on in the image to be selected. A zero means it has to exactly match. I tend to use between 10 and 20, but play around with it. ‘Contiguous’ when ticked means that only pixels connected to the click point are selected.

Landscape photograph of North Yorkshire, used as source for abstract shapes
North Yorkshire

When you click, you will see the ‘marching ants’ around the selected area. If it looks too limited, hold down the shift key and click somewhere nearby. Keep clicking until you get a shape that looks OK. Copy that selection [PSP Menu – Edit/Copy or Ctrl+C], then paste the contents of the clipboard into a new image [PSP Menu – Edit/Paste as new image or Ctrl+Shift+V]

The resulting image should be a random irregular shape, still at this stage in the colours of the original image, which still needs some manipulation to generate the cutting file. Start by using the threshold option to reduce it to a single colour. You will need to find the sweet spot to make the shape all black. If there are small gaps, you can touch them in with the brush tool.

You should now have an irregular shape with almost fractal edges. The stencil could be cut directly from this or the edges could be smoothed further, using the Median filter.

random irregular shape derived from a lan.dscape photo

You could also reverse the colours, as below. In both cases, there is no requirement to use the whole image, it could be cropped or modified further. The second image below is a detail from the first.

inverted version of random shape
detail from larger random shape

False Text

To create shapes with script like character, begin by creating a new document the size and resolution you require [PSP Menu – File/New or Ctrl+N] This opens up a dialogue box. Pick the size and resolution you want and select Vector Layer.

Now select the text icon from the left-hand menu. From the toolbar at the top, select the font and size you want. I suggest you start with either a large blocky font or a thin geometric font. Make sure both ‘font colour’ and ‘stroke colour’ are selected as Black, so that edge and infill are the same colour.

Click on the page at the top left and start to type text to fill the page. It doesn’t matter what you type. It doesn’t wrap automatically, so make sure to hit return at the end of a line. Once the page is full, go to the Layers Palette, right-click on the text layer and select convert to raster layer. This turns the text you have typed into just graphic shapes. You can now manipulate this image in various ways described below. All of these can be done in isolation or in combination. The order in which you do things will also often affect the outcome. Just play and see what happens. Remember, Ctrl+Z will back you out of anything you don’t like. You can back out of several steps if you wish.

Drawing over the lettering

Select the ‘pen’ tool from the icon menu on the left. If you hover your mouse pointer over the icons, you will see what they are called and also see the keyboard shortcut, which for the pen is V. A new toolbar should open across the top. From the ‘mode’ selection, choose the ‘Draw Lines and Polylines’ option. Moving along, deselect ‘Create on vector.’ Next make sure the line style is a solid line and finally type in the width of line you want to draw – here you may need to experiment (Ctrl+Z gets you out, remember). Make sure you are drawing white lines. Then click outside the page and draw a white line through your text. This will start to break up the image and move it away from recognisable text. Repeat as you think fit, changing angles and moving from horizontal lines to vertical lines.

Using software tools

Use Effects/Edge Effects/Dilate or Adjust/Add or Remove Noise/Median Filter to alter the letter shapes. Median Filter works well with the line drawing option above.

Copy the base image and then rotate it. Paste as New Image. Go to Image Arithmetic [PSP Menu – Image/Image Arithmetic] The drop-down boxes at the top of the window that opens should show the two images you have open. You will see a host of options. Just play with them. You will see that some of them look like the options for combining layers. The outcome will depend hugely on the nature of your original image. Note that for this approach, the two images don’t have to be the same size or proportions. If they are different, you may get an error message, in which case swap the two images over, and try again.

Using layers

Copy the layer [Ctrl+C] then rotate the existing layer 90°. Paste the contents from the clipboard as a new layer. [Ctrl+V] If the image is square, this will fit neatly over the bottom layer, otherwise you may need to click and drag the upper layer to a suitable position. Remember Ctrl+Z if you don’t like it. Select the new layer in the Layers Palette. Just above it is a box with drop down options that should start with ‘Normal’. Select ‘Darker’. You will now see both layers combined. Think of the layers as sheets of tracing paper. Now select ‘Lighter’ and see the difference. Try all the other options. Most won’t make any difference since you are working in black and white, but it’s a useful exercise in seeing what options are available. Try rotating 90° in the opposite direction. Try 180°. Combine this with the Mirror and Flip options [PSP Menu – Image/Mirror or Image/Flip]

For any image with multiple layers, try turning some of them off and on in turn. To do this, click on the little ‘eye’ icon on the appropriate layer. [Lower box to the left of the small picture of the layer] When the box is empty, the layer is turned off.

When you are happy with a particular multi-layer image, you can combine all the layers together or ‘flatten’ them. This reduces the file size and also prevents any inadvertent changes to layer settings. [PSP Menu – Layers/Merge/Merge All (Flatten)] You can use the various options under Layers/Merge to combine multiple layers in various ways. You can also save the flattened image under a new name and carry on playing with the various combinations. [PSP Menu – File/Save As and enter the new file name where prompted.] If you think about it, you can generate several very different images from different combinations of layers, all initially stemming from the same sketch. These new images can then in turn be added as new layers, offering even more possibilities.

Some examples of this process above.

Figure Ground plans

These can be made similarly to the false text. Draw the lines in black, without any underlying text. Then inverts the image and process in the various ways described above. Some examples below.

I’ve only hinted at the various options available. My advice is just to play, and where there is an option, turn it all the way up to 11 to see what happens!

Make sure you are working with copies of any original files, and be sure to save off any versions that look promising.

Posted on Leave a comment

Making digital cutting files for stencils from simple drawings

This post would probably have been better coming before Part 1. It was initially intended to be a single post, but grew too long. It covers ways to make cutting files for stencils from very simple drawings, using a digital cutter like Cricut.

Software

You will need some sort of photo editing software, but it doesn’t really matter what it is. My examples use Paint Shop Pro (abbreviated from now on to PSP) on a Windows PC, because that’s what I’m familiar with. Options include Photoshop Elements, Affinity Photo, Corel Painter Essentials or any of a myriad phone apps. You’ll need to find for yourself the equivalent tools to the ones I describe. You will also need software to convert the graphic file into a suitable format for your cutter. I will not be addressing that aspect.

You do NOT need to spend large sums on the full version of Photoshop, unless you are a professional graphic designer, in which case you know more than me…

My interest is in creating non-repetitive stencils rather than overall patterns, but the approach I use will also work for the pattern stencil.

Step 1 – create the image

Creating the cutting file for your stencil starts with a sketch design. Use a dense black pen (something like a Sharpie works fine) on white paper. Remember that completely enclosed shapes like rings will not cut properly unless you include a bridge link to the supporting material. Think of the difference between an O and a C. If you cut the outer edge of the O, the inner shape will also drop out, leaving a solid circle. Later, I’ll show you ways to check for areas where this might happen and some tools for avoiding it.

Once you have your sketch, you need to get it into the software. I simply take a photo on my phone, because I’m using freehand sketches and don’t need accurate geometry. If your design is more intricate, such as a Mandala, you will need to take care to keep your phone parallel to the image and ensure even illumination. You can scan it if you have access to a scanner, or you may prefer to do the sketch digitally. This might be a good option if you are working on an iPad/tablet or if you have a graphics tablet.

In my case, working with an Android phone and a PC, I’ve found the easiest way to get the file into my editing software is to share it from the phone to a folder in the cloud such as on Dropbox. Again, use whatever method is most comfortable for you.

Phone photo of simple line drawing with a sharpie pen
Simple line drawing with Sharpie.

Step 2 – resize the graphic image

Once you have the image in your editing package, you need to ensure it is big enough to create a cutting file. My phone produces .jpg files at 72 dpi. My cutter is a Cricut. The Design Space software works at 90 dpi. I simply resize using PSP to produce a file that will print to a maximum of 12” x 12” at 90 dpi. The normal constraints about pixelation are not an issue because this is largely removed on conversion to an .svg file for cutting.

Resizing in PSP

From the Menu select Image, then Resize – select ‘by size’ button and set the size you want, then set resolution at 90 pixels/inch. Ensure that the ‘Resample’ box is selected. If you want to change the proportions of your image, e.g. to convert from rectangle to square, then be sure to unselect the ‘Lock Aspect Ratio’ box. You can use this option too if you tried to create a specific aspect ratio, but you ended up with perhaps 11.5” x 12.1” instead of 12” x 12” or 7.3” x 4.9” instead of 7” x 5”.

Step 3 – convert to black and white

The next step is to ensure the image is just black and white, with no grey shading. In PSP, there are several ways to achieve this. The simplest is to reduce the number of colours to 2.

In PSP Menu – Image/Decrease Colour Depth/2 Colour Palette.

If your lighting is uneven, then this may translate into black areas which should be white. An alternative that usually avoids this is the ‘Threshold’ command, which is my preference.

PSP Menu – Adjust/Brightness and Contrast/Threshold. This brings up a slider control that allows you to fine tune the breakpoint between black and white. You’ll have to find the sweet spot for your particular image yourself.

Sharpie drawing after threshold command

You now have a version of your sketch in pure black and white. If you see odd black marks where they are not supposed to be, just paint them out in white with the brush tool from the icon bar on the left-hand side. Depending on the density of ink in your pen, the lines may not be continuous. You can test this by infilling each shape with a colour (assuming you used the Threshold command.) You can do this by selecting the icon on the left that looks like a paint-can tipping over and picking a colour from the palette on the top right. Then click inside the shape you want to fill. If a line is broken, something like this happens.

Effects of a break in a line

You can reverse this by undoing the fill command using Edit/Undo, or by infilling in white again. Both will take you back to the ‘Threshold’ version above.

Step 4 Fill in any line gaps

Your next step is to fill in any gaps in the lines. You need to zoom in and look for them. If there are only a couple of breaks, use the brush or pen tool to draw across the gap. If the lines are very broken, try using a command called Erode Edges first.

PSP Menu – Effects/Edge Effects/Erode.

This makes the lines less crisp and fills in minor gaps. If you still see gaps, you can repeat the command a couple of times

PSP Menu – Edit/Repeat or from the keyboard Ctrl+Y

Keep testing by infilling each space to see if thee are still leaks. At some point, it will be simpler to draw across any remaining gaps.

Your aim is to end up with lines that are continuous and allow each space to be infilled without any ‘spill over’. Once that is achieved, reduce the colours to 2 again.

Step 5 – prepare the cutting file.

Begin by creating a negative image from your file.

PSP Menu – Image/Negative Image

If you look at the example and think about how a stencil works, you will see that eventually you will be cutting out all the spaces surrounded by lines. This is easier to visualise if you swap the two colours over. The negative image however is now black around the outside of the image and this is not to be cut away. It needs to be turned white again with the ‘Flood Fill’ tool, giving you the image on the right.

You can stop at this point and use this to prepare the .svg file for your cutter, or you can manipulate it further. For example, the image as it stands still has the rough edges to the line created by the ‘Erode’ command. Leaving these in, gives an interesting effect when cut, but also increases the time it takes to cut.

Further options

There are two options you can consider here. They both have similar effects, although not identical, so have subtly different outcomes. The first is an Edge command called ‘Dilate’ This has the effect of shrinking the black shapes slightly by somehow drawing back the line edge. This can create pixel sized gaps that might need touching in with the brush tool. The other command is called ‘Median Filter’ As the name suggests, this smooths the edge by averaging it out. It also enlarges the white gaps between shapes and rounds off corners. The intensity of the effect is controlled by a slider. Both can be applied repeatedly or sequentially, with subtle variations in the outcome. Try them out to get the effect you like. Remember, if it doesn’t work, you can back out with Ctrl+Y.

PSP Menu – Effects/Edge Effects/Dilate

PSP Menu – Adjust/Add or Remove Noise/Median Filter

Rounded edges after use of median filter

Cutting the stencil

To cut the stencil, the .jpg file needs to be converted to .svg format. I do this using the free program Inkscape. I won’t go into that in detail here. The .svg file is then loaded into the appropriate software for your cutter. Again, I won’t go into detail on that aspect.

Your views

This is a long and quite detailed post. I’m sure there are other ways to achieve the same ends. Let me know in the comments if you have done this in other ways or if you find any errors. Menu commands for PSP are as used in the 2021 edition.

Posted on Leave a comment

Lessons learned

My last post, about using periodic reviews of old work as a mechanism for moving forward artistically, made me remember something I know in theory, but keep forgetting. Perhaps I need to review lessons learned too. I tend to describe myself as a printmaker. It is easy to forget – well, I find it easy anyway – that the print doesn’t have to be the end state. This is especially so with gel printing or screen printing, which use acrylic paint. Take this image, from that last post.

Pictogram - gel print
Pictogram – monotype print 30 cm x 30 cm

The initial inspiration was the idea of the pictograph (definition 1 in link) as developed by Adolph Gottlieb. The mark in yellow was also supposed to be redolent of Japanese or Chinese calligraphy. The problem I have with the image is the purple/white patches which break the mark are unrelated to it and to anything else in the image. I spent some time thinking about how to overprint them using gel printing without losing other aspects, which do work. Then it stuck me. Paint them out! That was lesson one…

I would be in good company doing this. Gillian Ayres, for example, used to set aside some prints from an edition, specifically to overpaint, an example being Springfield No 2 from 1999.

The second lesson learned, which seems even harder to remember, is that every blog post doesn’t have to be a dissertation! Just because I like writing long posts, doesn’t mean others want to read them! I’ll do my best, though, because if I can remember that lesson, I’m more likely to keep posting.

Posted on 3 Comments

Moving forward

I’m always scanning through the pile of unfinished pieces in my studio. Once enough time has passed from me to forget how they were made, they become objects in their own right. Moving forward by reviewing old work and thinking about the next steps becomes much easier. Looking at the work of others, as I have been doing over the past couple of days with John Hoyland for example, is often enough to shake your mind free. The image below is an example of such a review.

Pictogram - gel print
Pictogram – monotype print 30 cm x 30 cm

Less regularly, I review the pile of finished but unframed prints. When I do this, I typically change my mind about some of them. The last time I did this, I removed about 10% as no longer being acceptable quality. Some of these may benefit from additional work, and others may have elements that can be salvaged to make smaller pieces. Many of the Tiny series were made that way.

tiny collagraph print
Tiny collagraph print

I’m aiming to get back in the studio next week, probably starting some new prints from scratch, although for some reason, I’m getting the urge to paint and create some really heavy textures. Time to dig out the Polyfilla?

Posted on Leave a comment

Influences

What or who is the biggest influence on your work? I’m not sure if I can give a coherent answer to that question. I rarely try to deliberately emulate the work of another artist. If I do, it is largely for self-instruction. This one, for example, is called Shalimar. It was an examination of the Ocean Park paintings of Richard Diebenkorn.

Shalimar - monotype in blues and greys
Shalimar – monotype print made with acrylic on paper

Beyond that, it gets a bit more tenuous. I look at a lot of art books – and the real thing too when I get the chance. I don’t see explicit direct influences in my work, but I suppose others more distant from it might. There are many things I explicitly avoid, too. There’s a very strong generic look around at the moment. Look on Instagram or Pinterest to find many examples, with patches of colour against neutrals or greys, coupled with curved shapes in black or white.

Recently I came across a wonderfully eclectic list of influences, cited by the artist John Hoyland in a talk he gave at the Tate in 1980.

shields, masks, tools, Avebury Circle, swimming underwater, views from planes, volcanoes, mountains, waterfalls, graffiti, the cosmos inside the human body, food, drink, music, dancing, relenting rhythm, the Caribbean, the tropical light, the northern light, the oceanic light. Borges the metaphysical, dawn, sunsets, fish eyes, flowers, seas, atolls. The Book of Imaginary Beings, the Dictionary of Angels, heraldry, Rio de Janeiro, Montego Bay”.

John Hoyland 1980

That’s a great list. It is probably closer to the way most of us absorb influence in any field, not just art. One of the things that struck me is that there are no artists in the list. The sort of ‘copycat’ work that abounds on Instagram and Pinterest doesn’t stem from this sort of list.

Somewhere in one of my notebooks is a list I made, not of influences, but just headed as ‘Things I Like’. From memory, it included:

stone circles, standing stones, hill figures, neolithic carvings, NASA/Hubble photographs, collections of similar objects, cave paintings, Nazca lines, shadows, Native American art, city plans, layers, mid-century graphics, Miles Davis, Duke Ellington, Science Fiction, Martian landscapes, Misssissippi maps, valley sections, Northern landscapes.

shadows on the High Level Bridge
Shadow on the High Level Bridge

Do you have a list you are willing to share? Let me know in the comments.

Posted on Leave a comment

More play…

My last post talked about creative play as an essential part of the artistic process. I don’t have much to add to that, other than to post some examples of outcomes. These are the vertical panoramas I referred to in that post. Several are in the shop already, but the full set so far are posted below. I’m sure there will be more while I have problems working in my studio.

I find also that playing digitally is a source of inspiration for the inky fingers type of printmaking. I can try out broad compositions very quickly and ‘back out’ of them equally quickly if they don’t work. Digital files also provide useful sources for stencils. I cut these from Mylar with a digital cutter. The model I use is a Cricut Maker, but there are several other brands

I took the decision to issue these as limited editions. This is something I still don’t feel entirely happy with, especially given the nature of digital images, but it seems to be expected by buyers. I do however print all my own work. No one else is involved. Please let me know what you think about the issue in the comments.

Posted on Leave a comment

Make time for play

For me setting aside time for play is a key part of creativity. It’s a way to get past my inner censor. It allows me to fail. That’s important because without failure there is no measure of success.

It’s almost a month since I spent time in my studio. Initially I took a break to think, because I found myself repeating the same thing. The work looked superficially different, but the process was the same, and so less and less enjoyable. Some health issues then intervened, so my time away from the studio became even more protracted.

I’ve already blogged about making digital prints. They are where I came from as a printmaker, so an important part of my practice. Going back to them while not in the studio was still a form of play. It gave me the freedom to think about ideas of shape and form and composition without investing too much time. Or money for that matter, since decent paper is not cheap. In the end, even though I was ‘only playing’ the outcomes were very satisfying, and I ended up with two ‘suites’ of prints. One is a set of square prints which relate quite strongly to the monotypes I have been making all year. The second set are panoramic in format, but oriented vertically. I wanted to avoid any landscape references and make these wholly abstract.

Digital abstract print
Aksinto – digital abstract print

This isn’t the first time I’ve used play to generate work. Back in 2014 I made a set of what I later called Tinies. I was painting then and very bad at judging how much paint to put on my palette. Rather than waste the leftovers I took, as I realised later, what were monotypes from the palette using some heavy mixed media paper I had to hand. Later I cut these down into small squares, each about 25-30 mm on a side. My original intention was to reassemble them into a collage.

I never made any progress, although I did play around with the pieces for a while. I kept the pieces though, then later still, mounted a selection of these to fit into a 6” x 6” frame (150 mm). When I took these to an ‘art boot sale’, to my surprise they sold very well. Many were sold before I decided to number the rest into a series – Tiny 2014.

The next year I acquired a number of pieces of mount board, originally samples of different colours. I used these to make a set of collagraph plates, experimenting with materials like tile cement. Printing these allowed me to play gain, experimenting with colour combinations, trying out the effects of overprinting colours. These became Tiny 2015.

Tiny collagraph
Tiny 2019 No 12 – collagraph

Tiny 2017, was another set of ‘found images’, this time cut from failed monotypes made with oil based inks, while Tiny 2019 was a return to the small collagraph plates. So far there have been no more.

Now though, I’m itching to get back to physical printing. I find it immensely satisfying to see an image gradually emerge out of the clutter of bits of paper, stencils and general rubbish I use to make my monotype prints. How I do that will be covered in another post.

I hope though that I can still retain the freedom from the last few weeks of ‘playtime’.

Posted on 1 Comment

Artist book ‘Grafia Callada/Hushed Writing’

This isn’t the post I intended for today, which I’m still writing. Instead, here is a YouTube video about a wonderful artist book I came across only this week. It is by Pepe Gimeno and is described as “a book about writing without a single word.” Watch the video, and you will see how apt that description is.

Posted on 6 Comments

Using your gel prints as a resource for digital printmaking

I haven’t finished cutting the stencils from the previous post, so I’ve been playing with combining the files digitally. The results were quite interesting in themselves, but also triggered some ideas about combining these stencils with dry points also made from digitally cut plates. I will be parking those for now, but it is definitely something I want to explore at a later date. In this post, I want to concentrate on using these separation files in digital printmaking.

As I said in my previous post, Paint Shop Pro (PSP) can create colour separation files, but these are too ‘busy’ to use directly for cutting. Once cleaned up and simplified, the new files can be recombined in the same fashion as the originals. This is the start point for this post. I’m using images made by gel printing, but you can of course use any digital image, including photographs.

This is “Waterloo Sunrise”. Like those in my previous post, it is a monotype made with acrylic on paper. You can buy it here.

Grey scale images

These are the grey scale images from the Cyan, Magenta, Yellow and blacK channels.

It is worth noting here that PSP can also make RGB separations, i.e. Red, Green, Blue, which can be cleaned up and simplified in the same way. This is what you get from those separations.

Creating combinations

These greyscale separation files can be used in various ways to extend your digital printmaking and allow you to try out ‘digital proofs’ before you start on the physical print. I’ve provided numerous examples below.

Here for example is the image made using the simplified CMYK files.

Version of original image made using simplified CMYK files
Image made from simplified CMYK files

Here is the image made from the simplified RGB files

Version of original image made using simplified RGB files
Image made using simplified RGB files

Mixing things up

But what happens when you swap the Cyan file out for the Green?

Version of original image using Green in place of Cyan in CMYK files
Image from Green, Magenta, Yellow and Black

Or replace the Magenta with Red?

Version of original image made using Red in place of Cyan in CMYK
Image from Cyan, Red, Yellow and Black

Or indeed Blue with Magenta

Version of original image made using Magenta instead of Blue in RGB
Image made using Red, Green, Magenta

You don’t have to use the simplified files. The original separations can be recombined in this way too. It is off-topic for this post, but try doing this with photographs. The effect ranges from slightly ‘off’ to wildly surreal.

Other effects are possible if the colours are juggled around as say YCKM or KCMY.

Version of original image shuffling CMYK files as YCKM
Image made as YCKM
Version of original image shuffling CMYK files as KCMY
Image made from KCMY

You can of course combine the different separations and juggle them.

Version of original image shuffling CMYK and RGB files as MCGR
Image made as MCGR

It is possible to use the same file more than once

Version of original image made using Cyan twice, second copy replacing Yellow as CMCK.
Image made using cyan twice as CMCK

The duplicated file can also be rotated (if square) or flipped/mirrored otherwise. In this one, Cyan is mirrored horizontally, with this version replacing Yellow. You can see that the green bar – a mixture of cyan and yellow on screen, is now shown as the two separate colours with a tiny slice of green where they overlap.

Version of original image made using Cyan twice, the second copy mirrored as CMCK
Image made using cyan twice but second copy mirrored.

Taking it further

By now, it should be obvious that the original content is irrelevant. We are using these files simply as abstract shapes. With the seven possible files from the original image, you have over 800 possible combination if you treat them as CMYK. (That’s 7x6x5x combinations.) It would be many more if you allow the same file to be used more than once. Throw in a second image and the number of permutations mushrooms to over 24000! (14x13x12x11)

There are obviously a lot of choices available, although as you try them out you will start to get a feel for what is likely to work best for you. While It is almost miraculous how colours appear as if from nowhere, the prosaic explanation is simply that whatever file is used in, for example the ‘C’ location, the computer thinks it represents Cyan and treats it accordingly when the file is displayed.

EDIT: Since I wrote this, we’ve seen the rise of AI art, which raises all sort of questions about originality, but also offers yet another way to edit and modify scanned gel prints, by for example taking them into the AI app, then exporting again to combine digitally with other image, to split into channels for silk screen printing or Risograph printing. I’m still mentally processing this, but you can read the first of a series of posts on AI and AI art here. The others in the series are linked from there.

‘Real World’ parallels

There are ‘real world’ parallels. In the later years of their lives, both Bert Irvin and Wilhelmina Barns-Graham made large numbers of screen prints. Independently they both seemed to create a ‘library’ of screens from painted marks which were then combined in various ways to produce their prints.

Even if you never print any of these digital recombinations, the process I’ve described can be used as a kind of digital proofing, to get a sense of how shapes work together before you ever apply ink or paint to paper or canvas. If you want to try digital printmaking, this approach gives you a useful entry point. Give it a try. I would love to see what you come up with. If I get enough responses, I’ll put them together in a post.

Posted on 3 Comments

Making stencils for gel printing with a digital cutter – part 1

This is the first of a planned series of posts about making stencils for gel printing using a digital cutter. In my case it is a Cricut Maker, but the principles are general.

Making colour separations

These stencils came out of some thoughts I had about making silk screen versions of my gel prints. I was hoping to use colour separations. This is the process by which original full-colour digital files are separated into individual colour components for four-colour process printing. Every element in the file is printed in a combination of four colours: cyan, magenta, yellow, and black. This is known as CMYK in the world of commercial printing and in silk screen printing. This isn’t an original idea, of course. Anyone familiar with Matisse will almost certainly be aware of his stunning cutouts, but may not be aware that they were also published in silk screen versions.

I began with a scan from one of my prints. I created the CMYK colour separations with Paint Shop Pro (from now on PSP). Unfortunately, I no longer have access to screen beds, so this is currently not an option. In practice, I don’t think I’m fit enough any more, to spend several hours pulling ink through the screens. However, having already used scans of pen drawings to make stencils, I decided to experiment with these separations. The print I’m using here is called ‘Area 52’, available from my shop.

The image below is an example of one of the colour separations. This is from the magenta colour channel. In this form, it clearly can’t be used directly to make a stencil suitable for gel printing.

Magenta colour separation from original image file. Not suitable for making stencils in this form.
Magenta colour separation from original image file

Simplifying the file

To create a version that can be cut as a stencil, it needs to be much simplified. I did this using various tools in PSP, which led to this. (More details of the process by which I did this, will be in later posts. If you can’t wait though, get in touch and I’ll try to help.)

Simplified magenta file suitable for making stencils
Simplified Magenta channel

PSP allows me to digitally recombine these simplified images, which led in turn to this image. This is closer to what you would get with screen printing, but is useful to visualise the outcome.

Digitally image from recombination of simplified image. Simulation of effect of using stencils made by digital cutter.
Digital image created from recombined and simplified channels

Be flexible

However, just because a file is called magenta, doesn’t mean that it has to be used that way. PSP allows me to digitally recombine the image files in any order. With four files to combine, there are 24 possible combinations, so this one below is just one. It helps to make a point though. When the stencils are cut and used to make gel prints, you have complete freedom in the colour you use.

Digital image created by shuffling colour separation files when recombining. Simulation of effect of using stencils made by digital cutter.
Image created by recombining channels in different order.

In the real, as opposed to the digital world, there are other variables. Varying the opacity of the paint used, and varying the order in which you use the stencil, will also give different results.

Finally, just as an experiment, here is a combination image using CYMK files from two different images. I’ve included it just to make the point that once you have the stencil you have complete freedom in their use.

Abstract Digital print in bright colours
Electric Avenue – limited edition digital print

In many ways, this last image is analogous to making a collagraph print from multiple plates. I have experimented with this many times in the past.